Light Blue EasyFil ABS FormFutura 1.75mm Filament
- Shock resistant.
- Excellent stability.
- Very strong & durable.
- Diameter 1,75mm
- SKU: 175EABS-LIBL-0750
- Vicat softening temperature of ± 103 ° C
- Higher print temperatures than normal ABS.
- Recommended processing temperature 220-270° C.
- Additional information
- Reviews (0)
FormFutura EasyFil™ ABS Light Blue 1.75mm
Light Blue EasyFil ABS is an easy to use and high-end Acrylonitrile Butadiene Styrene 3D printer filament. EasyFil ABS prints at slightly higher printing temperatures than regular ABS, but its superb process stability and physical features make EasyFil ABS a much more impact resistant and printable ABS type of filament compared to average ABS filaments.
Next to its “easy to use” features, our Formfutura EasyFil™ filament range has an excellent roundness and very tight diameter and validity tolerances, which makes this filament a perfect match with all common desktop 3D printers. Printing with EasyFil™ ABS 3D printer filament will go very smoothly with basically all FFF/FDM technology based desktop 3D printers.
- Superb process stability and limited warping.
- Significant higher impact resistance than average ABS.
- Very strong and durable. Light-weight.
- Viscat softening temperature of ± 103° C.
- Wide variety of vivid opaque colours.
General Printing Guidelines
|Nozzle size: ≥ 0.15mm||Layer height: ≥ 0.1mm||Flow rate: ± 104%|
|Print temp: ± 225 – 270° C||Print speed: Medium||Retraction: Yes ± 5mm|
|Heat bed: ± 90 – 110° C||Fan speed: 0-30%||Experience level: Intermediate|
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different types of printers, hot-ends, and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
|ρ: 1.03 g/cc||50 gr coil||0.75 Kg spool||2.3 Kg spool|
|Ø 1.75mm||± 20.2m||303m||928m|
|Ø 2.85mm||± 7.6m||114m||350m|
This filament is compliant with the below-listed directives and regulations.
- RoHS directive 2011/65/EC
- REACH directive 1907/2006/EC
Tips General Tips & Tricks for printing with ABS filaments.
The printing temperature guideline for printing with our EasyFil™ ABS filament is approximately 220-260˚C. As each desktop 3D printer has its own unique characteristics, you might need to tweak around with your temperature settings a bit to get the best results. To obtain optimal results for your prints you need to take into account variables like your 3D printer’s nozzle diameter, your printing speed settings, and layer height.
It is recommended to use a heated print bed when printing ABS. ABS has a tendency to warp, which makes it a difficult material to print without a heated print bed. Even though EasyFil™ ABS has a lesser tendency to wart than “normal” ABS it is still recommended to use a heated print bed. Ideally, your print bed temperature should be set at approximately 90° to 110 ° C.
|Dimensions||20 × 20 × 6 cm|