FormFutura Opal Green Galaxy PLA Filament – 1.75mm
- Filament Net Weight: 750 GR.
- 3D print objects without visible layers.
- Not abrasive to the nozzle of 3D printers.
- Incredibly deep coloured 3D printer filament.
- Improved flow and adhesion between layers.
- 1.75mm Galaxy metallic PLA (Poly-Lactic Acid),
- Recommended Printing Temperature: 200°C – 230°C
- Warp-free printing and no deformation after cooling.
- SKU : 175GLXYPLA-GREEN-0750
- Additional information
- Filament Length
- Reviews (0)
FormFutura 1.75mm Galaxy – PLA – Opal Green
FormFutura Opal Green Galaxy PLA is a deep metallic colored PLA range – based on our EasyFil PLA compound – with an incredibly high amount of silver aluminum flakes added. The high-added aluminum-flake content gives a beautiful sparkling, reflecting and glittering finish to Galaxy PLA printed objects.
Due to the high amount of silver aluminum-flakes added to the Galaxy PLA compound you can 3D print beautiful shimmering objects without visible layers and subtle color shadings and radiance. Even though its high silver-aluminum-flaked content Galaxy PLA is not abrasive to the nozzle of your 3D printer.
General Printing Guidelines
|Nozzle size: ≥ 0.15mm||Layer height: > 0.1mm||Flow rate: ± 100%|
|Print temp: ± 210 – 235° C||Print speed: Medium||Retraction: Yes ± 5mm|
|Heat bed: ± 0 – 60° C||Fan speed: 50-100%||Printing surface: Blue Tape / Glass|
|Enclosed printer needed: No||Heated Build Chamber: No||Experience level: Beginner|
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends and printer offset that it is extremely difficult to give an overall one-size-fits-all setting.
|Dimensions||20 × 20 × 6 cm|
|ρ: 1.24 g/cc||50 gr coil||0.75 Kg spool|
|Ø 1.75mm||± 16.8m||± 251m|
|Ø 2.85mm||± 6.3m||± 95m|