Polymaker PolyMax PLA 1.75mm (750g)
- Easy to print.
- Jam-free technology.
- Nozzle Temp 190˚C – 230˚C
- Nano-reinforcement technology.
- Excellent mechanical properties.
- Additional information
- Technical Parameters
- Reviews (0)
1.75mm Polymaker PolyMax PLA (750g)
Polymaker PolyMax PLA – PolyMax™ PLA is an incredibly easy-to-print filament with improved mechanical properties, making it an excellent alternative to ABS. This is a family of advanced 3D printing filaments produced with Polymaker’s Nano-reinforcement technology, to deliver exceptional mechanical properties and printing quality.
Regular PLA is a very brittle material, which greatly limits its range of applications. PolyMax™ PLA was designed to change this. Featuring increased impact strength of up to 9 times that of regular PLA and 20% better than ABS, PolyMax™ PLA is a sure winner when it comes to toughness. So if you are looking for a material that can withstand your mechanically demanding tasks, PolyMax™ PLA is up to the challenge.
The good mechanical strength of PolyMax™ PLA is achieved with no compromise in printing quality. As PolyMax™ PLA is also produced with Jam-Free™ technology you can be certain you will get high-quality prints with excellent strength while still enjoying the ease of printing PLA.
ABS? No More
Still, printing ABS while trying to endure the odor and potential health risk? With PolyMax™ PLA you can get rid of that potentially hazardous ABS and still achieve the same structural strength with even more benefits such as better printer compatibility, easier printing, less warping, no harmful odour, and in many cases even better mechanical properties.
|Dimensions||20 × 20 × 6 cm|
True Black, True Grey, True White
|Nozzle Temperature||190˚C – 230˚C|
|Printing Speed||40mm/s – 60mm/s|
|Bed Temperature||25˚C – 60˚C|
|Bed Surface||Glass with glue, Blue Tape, BuilTak®|
|Young’s Modulus||1879 ± 109 Mpa|
|Tensile Strength||28.1 ± 1.3 Mpa|
|Bending Strength||48.0 ± 1.9 Mpa|
|Charpy Impact Strength||12.2 ± 1.03 kJ/m2|
|Glass Transition Temperature||61˚C|
|Vicat Softening Temperature||62˚C|
|Recommended Support Materials: PolySupport™, PolyDissolve™ S1|
|Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters.|